Table of Contents
Advertisement
1. OPERATIONAL OVERVIEW
1.2
Turning the Power On/Off
1.2.1
Turning the power on
Press the POWER ON (|) switch. A beep sounds, the lamp above the switch
lights, and the last-used mode is presented.
1.2.2
Turning the power off
1. First retract the transducer with the [ ] key. The lamp above the switch blinks
while the transducer is being raised and lights steadily when it is fully raised.
Note: While raising the transducer, the ship speed must be no more than 15
2. Press the POWER OFF (
key lights steadily.
Note: The transducer is automatically retracted into the tank if the POWER
1-2
kts to prevent damage to the transducer and hull unit.
OFF (
) switch is pressed before retracting the transducer. However,
for safety purposes, make it a habit to retract the transducer before
turning off the power.
POWER
POWER OFF
switch
POWER ON switch
POWER & TRANSDUCER controls
) switch for more than one second, after the [ ]
TRANSDUCER
Full protrusion key
Mid protrusion key
Retraction key
Advertisement
Table of Contents
Troubleshooting
