Hpe 3Par Storage System Setup Wizard - HP HPE 3PAR StoreServ 8000 Installation Manual

HPE 3PAR Storage System Setup Wizard

The 3PAR Storage System Setup Wizard proceeds through the following pages:
Welcome
Enter Serial Number
Verify Storage System
Configure Networking
Configure Time
Change Password
Verify Configuration
Progress
Results
To launch the 3PAR Storage System Setup Wizard in 3PAR SmartStart:
NOTE: The 3PAR Storage System Setup Wizard might not display correctly when using
Microsoft Internet Explorer 10 with default security settings. If the wizard continues to display
incorrectly, try refreshing the browser page.
1. On the 3 Setup storage system page, click the Setup storage system link.
2. Enter the SP IP address. Click OK.
NOTE:
address.
NOTE:
Microsoft Internet Explorer 10 with default security settings. If the wizard continues to display
incorrectly, try refreshing the browser page.
3. On the Windows Security dialog box, enter setupusr in the User Name box and the
password previously set during the SP setup.
4. Click OK.
108 Service Processor and System Setup
When configuring in a DHCP network environment, enter the VSP temporary IP
The 3PAR Storage System Setup Wizard might not display correctly when using