Sp Wizard Step 2-Generate Sp Id - HP HPE 3PAR StoreServ 8000 Installation Manual

SP Wizard Step 2—Generate SP ID
The Generate SP ID page shows the information that is required to generate the SP ID.
1. Enter the 3PAR StoreServ Storage serial number.
Figure 83 Serial number label locations for 4-node and 2-node systems
NOTE:
The 3PAR StoreServ Storage system serial number can be obtained from the following
locations:
At the rear of the system next to the power switch for the controller node enclosure PCM
In the product documentation provided with your system
102 Service Processor and System Setup