HP HPE 3PAR StoreServ 8000 Installation Manual page 137

7 ==>
8 ==>
9 ==>
10 ==>
11 ==>
12 ==>
13 ==>
14 ==>
15 ==>
16 ==>
17 ==>
18 ==>
19 ==>
20 ==>
21 ==>
22 ==>
X Return to previous menu
14. Enter Y to confirm that you want to halt and power off the SP.
1.3.1 SP SHUTDOWN
Transfer media: ethernet
Confirmation
Enter Control-C at any time to abort this process
Halt will power off the SP!
Are you certain you want to halt the SP now?
(y or n)
15. Set all power breakers on the PDUs to the OFF position.
CAUTION: For safety precaution, all drive magazines must be properly grounded before
removing from the drive chassis.
16. Unplug the system main power cords.
17. For system and drive expansion cabinets, coil all main powers cords and strap the cable
along the mounting rails on the side of the cabinet panel. Use a cable tie wrap to secure the
cords inside the rack.
18. Disconnect all external connections from the host computer(s) and drive cage expansion
racks to the system and remove the cables from the rack. Leave the internal Fibre Channel
and SP connections intact if possible.
19. Insert dust plugs into all open system Fibre Channel ports and secure all Fibre Channel,
Ethernet, and serial cables remaining inside the rack.
SP File Transfer Trigger
Reset Quiesce state in Transfer process
Mount a CDROM
Unmount a CDROM
SP Date/Time/Geographical Location maintenance
Manage NTP configuration
Display SP status
SP User Access Control
SP Process Control Parameters
Maintain SP Software
SP File Maintenance
RESERVED
Request a SPLOR
Request an MSPLOR
Run SPCheckhealth
SP Certificate Information
HP 3PAR Service Processor Menu
Transfer status: Ok
Uninstalling the System 137