Table of Contents
Advertisement
Crushing hazard
The weight of the standard version is 75 kg. Depending on the options ordered, the weight
differs from the standard version. Lift the charging station with at least two persons and
suitable lifting equipment.
Lifting the station may result in hazards that could cause not only serious material damage
but also serious injury. Do not insert or hook fingers into eyelets, cable grommets, or
openings.
Ensure that persons maintain sufficient distance to avoid injury when setting the charging
station down.
2.3
Safety during electrical installation
Observe the following points for the electrical installation. The electrical connection of the
charging station can only be performed by skilled electricians and can only be carried out at
zero current. Follow the installation and connection instructions. Observe the applicable
regional standards and regulations. Failure to follow safety instructions may result in
hazardous situations that could cause death or serious injury.
Safety at the work site
When working on roads, construction sites and in public areas, ensure safety in line with local
requirements and regulations.
To perform the work properly, you need to observe:
• Legal specifications
• On-site safety requirements
• Road traffic conditions
Note the following:
• Secure the working area in accordance with the "Guidelines for the safety of workstations
on roads" or similar regional regulations.
• Use appropriate cordoning equipment where necessary.
• Always wear a safety vest when working in the area of road traffic.
• Provide for adequate space in the working area. The working area should be at least 8
meters in diameter.
• Comply with the valid building regulations for parking spaces for electric cars including
charging stations.
Risk of electric shock
The charging station uses 400 V AC supply voltage. Touching live parts may cause electric
shock or death. To avoid hazards, the charging station may only be opened by trained and
instructed qualified personnel.
Before opening the charging station, switch off all power supplies for the device. Secure the
charging station against restart.
The charging station is switched off via the load breaker switch. Activation is not possible in
the charging station. De-energize the supply line.
Pull the plug, not the mains cord.
Never touch the plug with wet hands.
SICHARGE Operating Instructions MID
Operating Instructions, 02/2023, A5E48573001-AF
Safety information
2.3 Safety during electrical installation
13
Advertisement
Table of Contents
