Table of Contents
Advertisement
Safety instructions
2.6 Security information
2.5
Safety during operation
Observe the following points when operating the Wallbox, as well as the applicable regional
standards and regulations. Failure to follow safety instructions may result in hazardous
situations that could cause death or serious injury.
Electrical hazards
The Wallbox uses 230 V AC or 400 V AC supply voltage. Touching live parts may cause electric
shock and could be fatal.
Work on the electrical installation may only be carried out by trained electricians and at zero
current.
• Pull the plug, not the mains cord.
• Never touch the plug with wet hands.
• Do not perform any installation, maintenance, or configuration work during a
thunderstorm.
• Do not connect the vehicle to or disconnect it from the Wallbox during a storm.
Charging cable and socket
Defective connectors or cables may cause fire. Decommission the system if there are defects.
Have the defective parts repaired by qualified personnel.
Do not bend or squeeze the charging cable; do not run it over sharp edges, and use it only
within the permissible temperature range.
Inspect sockets and the charging cable for damage on a regular basis.
2.6
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please
visit.
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers' exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed visit.
14
VersiCharge Column Mounting
Hardware Installation Manual, 06/2022, A5E51460654-AB
Advertisement
Table of Contents
