Safety During Setup, Installation And Maintenance - Siemens VersiCharge Operating Instructions Manual

Safety information

2.2 Safety during setup, installation and maintenance

Cleaning
Protect the environment and use biodegradable cleaning agents to clean surfaces. Clean
surfaces of the charging station using a damp cloth.
Do not use steam jets or water jets for cleaning, as they may cause moisture or water to
infiltrate the charging station. Moisture inside the charging station poses a risk of electric
shock.
Failure to follow these instructions may result in hazardous situations that could cause death
or serious injury.
2.2 Safety during setup, installation and maintenance
To avoid hazards, only qualified personnel may place and install the charging station. The
charging station must be disconnected from the mains. Follow the installation and assembly
instructions provided. Observe the applicable regional standards and regulations, e.g. the five
safety rules. Failure to follow safety instructions may result in hazardous situations that could
cause death or serious injury.
Safety at the work site
When working on roads, construction sites and in public areas, ensure safety in line with local
requirements and regulations.
To perform the work properly, you need to observe:
• Legal specifications
• On-site safety requirements
• Road traffic conditions
Note the following:
• Secure the working area in accordance with the "Guidelines for the safety of workstations
on roads" or similar regional regulations.
• Use appropriate cordoning equipment if needed.
• Always wear a safety vest when working in the area of road traffic.
• Provide for adequate space in the working area. The working area should be at least 8
meters in diameter.
• Comply with the valid building regulations for parking spaces for electric cars including
charging stations.
Risk of accident in limited workspace
In order to avoid collisions and crushing, always ensure sufficient clearance to surrounding
obstacles when setting up the charging station.
There must be no objects on the ground in the working area to rule out the risk of tripping.
10
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA