Reinstalling Cards In The Line Card And Rp Card Cage - Cisco XR 12410 Installation Manual

Chapter 3 Installing the Cisco XR 12410 Router

Reinstalling Cards in the Line Card and RP Card Cage

Step 1
OL-17441-01
Before you begin reinstalling cards in the card cage, identify slot assignments by
referring to the written list you prepared when you removed the cards (refer to
Figure 3-7 for slot-numbering).
Use the following procedure to reinstall cards in the line card and RP card cage.
Starting at slot 0 (Figure
Slide the card into the slot until it mates with the backplane connector.
b.
a. Tighten the captive screws at the top and bottom of the front panel.
Figure 3-25 Installing a Line Card into the Line Card and RP Card Cage
ALARM A
ALARM B
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
3-25):
MBUS CSC
SFC
A
ALARM A B FAIL
ALARM B
ENABLE
A B 0
1 0 1 2 3 4
Reinstalling Cards in the Chassis
3-33