Cisco XR 12410 Installation Manual page 222

Router Specifications
Table A-3
Description
Source DC service
requirement
Redundancy
1. For each DC power entry module.
To ensure that the chassis configuration complies with the required power
Caution
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
A-4
DC Electrical Specifications
Value
Sufficient to supply the rated input current. Local
1
codes apply.
2 DC power entry modules required for 2N
redundancy
Appendix A Technical Specifications
OL-17441-01