Cisco XR 12410 Installation Manual page 31

Chapter 1 Product Overview
1 PCMCIA flash disk slots (shown with cover in
place) and slot LEDs
2 RJ-45 Ethernet ports and data status LEDs
3 Auxiliary serial port
Figure 1-10 Performance Route Processor 3 (PRP-3) Front Panel
1 2
OL-17441-01
3
Table 1-2 PRP-3 Front Panel Hardware Components Detail
Numeric Callout Hardware Components
1 Ejecter Lever
2 Handle
3 External Compact Flash
4 Reset button
5 Alphanumeric LEDs
PRP-3 is the route processor for the Cisco XR 12404 and 12804 Router chassis
running Cisco IOS XR Software Release 3.8.0 or a later release. The PRP-3 is
available as product number PRP-3 or PRP-3= for a primary route processor and
is available as PRP-3/R for a redundant route processor. PRP-3 has significant
improvements over PRP-2. These improvements include increased speed,
improved scalability, higher system memory, faster packet processing. Because
PRP-3 does not support Cisco IOS, the bootflash memory no longer exists in
PRP-3. PRP-3 ROMMON has software intelligence to download a Cisco IOS XR
image without the support of bootflash memory.
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
Line Card and Route Processor Overview
4 Console serial port
5 Reset button
6 Alphanumeric messages
ETH 0 ETH 1 BITS 0 BITS 1
RESET
AUX
CONSOLE
PERFORMANCE RP 3
4 5
1-17