Cisco XR 12410 Installation Manual page 119

Chapter 3 Installing the Cisco XR 12410 Router
Insert all cables into their assigned ports.
Step 6
Place several evenly spaced velcro straps through slots on the cable-management
Step 7
bracket
Route the cables alongside the cable-management bracket and secure them with
Step 8
the velcro straps as appropriate
Make sure the interface cables do not have any kinks or sharp bends which can
Caution
destroy or degrade the ability of the optical fiber to propagate the signal-encoded
beam of light accurately from one end of the cable to the other. Always allow
adequate strain relief in the interface cable.
OL-17441-01
(Figure 3-27a).
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
Connecting Line Card Network Interface Cables
(Figure 3-27b).
3-37