Prp Alphanumeric Message Displays - Cisco XR 12410 Installation Manual

Line Card and Route Processor Overview

PRP Alphanumeric Message Displays

Note
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
1-22
The alphanumeric message displays are organized in two rows of four LED
characters each (Figure
Figure 1-13 Alphanumeric Message Displays—Partial Front Panel
The alphanumeric message displays show router status messages during the boot
process, and after the boot process is complete.
During the boot process, the message displays are controlled directly by the
•
MBus module.
After the boot process, the message displays are controlled by Cisco IOS
•
software (through the MBus).
The alphanumeric message displays also provide information about different
levels of system operation, including the status of the GRP, router error messages,
and user-defined status and error messages
A complete, descriptive list of all system and error messages appears in the Cisco
IOS System Error Messages publication.
1-13).
Upper alphanumeric
LED display (four digits)
Lower alphanumeric
LED display (four digits)
Chapter 1 Product Overview
OL-17441-01