Supplemental Bonding And Grounding Connections - Cisco XR 12410 Installation Manual

Chapter 3 Installing the Cisco XR 12410 Router

Supplemental Bonding and Grounding Connections

Supplemental Bonding and Grounding Connections

Before you connect power to the router, or power on the router for the first time,
We recommend that you connect the central office ground system or new
equipment building system (NEBS) to the supplemental bonding and grounding
points on the router. For more information on supplemental bonding and
grounding cable requirements, see the "NEBS Supplemental Unit Bonding and
Grounding Guidelines" section on page 2-18.
Use the following procedure to attach a grounding cable lug to the router:
Install the locking washers and nuts over the bonding and grounding cable studs
Step 1
and tighten securely (Figure 3-19).
Figure 3-19 Router Rear NEBS Bonding and Grounding Studs
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
3-26
OL-17441-01