Factory Initialization Mode - Denon DRA-100 Service Manual

1. Factory Initialization Mode
The setting values are initialized. See Initialization Items (Default setting).
After initialization, the Unit returns to normal mode.
CAUTION
• Clears the version information such as rewriting failed log.
• Clears the history of protection.
• Power failure flag is not cleared.
• Can't erase the Recently Played list.
1.1. Operations
Press and hold the "WPS" and "iOS" buttons on the rear panel before inserting the AC plug, then insert the AC plug while
holding down the buttons and wait for more than 3 seconds.
Release the "WPS" and "iOS" buttons when the Standby Indicator lights. The unit switches to the factory initialization
mode. The unit switches to the factory initialization mode.
Startup display
All indicators lit (2 seconds)
↓
All off (2 seconds)
↓
All LEDs on the unit lit (4 seconds)
↓
"Factory Reset" is displayed for 5 seconds.
Initialization Items (Default setting)
source
BASS
TREBLE
BALANCE
DIMMER
VOLUME
Favorite list
iPod mode
Auto-Standby
Protection history
Network setting
Network Control
Source Direct
Bluetooth device list
Volume Limit
H/P Amplifier Gain
Audio Out
Default
Internet Radio
0 dB
0 dB
CENTER
100%
--db
Clear all
From iPod
15min(EU), OFF(JP)
NO PROTECT
Clear all
OFF
OFF
Clear all
-30dB
Low
Variable
18