Table of Contents
Advertisement
1.3. File structure on USB Memory
Copy the update files to the USB memory with the following structure.
USB memory root
Model Name
DRA-100
+ firmwares
+ 000200XXXXXX
+ enc_update.xml
+ IMG.bcd
+ SBL.bcd
+ SYS.bin
1.4. Insert the USB memory into the USB port.
NOTE : Remove the LAN cable from this unit when performing updates.
1.5. Start the update.
Press and hold the power operation button " X " before inserting the AC plug, then insert the AC plug while holding down
the button and wait for more than 3 seconds.
Select "USB Update" using "CURSOR d " and "CURSOR f ", then press the "Enter" button to select.
1.6. Display during USB update
(1) The following message appears on the display.
Display
(2) Press "ENTER" key on Main unit
Then start Firmware Update.
Display
(3) The firmware update finishes.
The unit restarts after the update is finished.
---Cautions on Firmware Update---
• Never remove the USB memory before the update is finished.
• Never turn off the power before the update is completed.
• It takes around 0.5 hour to complete the update.
Once an update is started, normal operations cannot be performed until it is completed.
Also, setting items may be initialized.
Note down the settings before updating, and set them again after updating.
Model Area
Europe (E2)
Japan (JP)
USB メモリへファー
ムウェアをダウンロー
ドしてください。
Product ID
000200160200
000200160400
26
Advertisement
Table of Contents
