Main/Sub Setting
Result: The controller is now designated as slave.
Note(s)
The following functions are not available for slave controllers:
Auto operation mode
Individual airflow direction
Filter auto clean
Setback temperature setpoints
Draft prevention
Duty rotation
3.3
When Wireless Remote Controller is Used Together
When using both a wired and a wireless remote controller for 1 indoor unit, the wired controller
should be set to Main. Therefore, the Main/Sub switch (SS1) of the signal receiver PCB must be
set to Sub.
36
Main/Sub
Main
Main/Sub switch
S
(SS1)
M
The side painted black indicates
the switch knob position.
Transmitter assembly
S
M
2 3
1
SS1
SS2
Sub
S
M
SiME332106E
Part 3 Remote Controller