Daikin VRV RXYMQ-A Series Service Manual page 101

SiME332106E
1.4.3 Filter Cleaning Sign
Whether or not to display the sign after operation of a certain duration can be selected.
10 (20)
1.4.4 Information for intelligent Touch Manager / intelligent Touch
Controller
10 (20)
 When field setting 10 (20)-6-02 is set at the same time as 10 (20)-2-01,02,03, field setting 10
(20)-2 has priority. When field setting 10 (20)-6-01 is set at the same time as 10
(20)-2-01,02,03, field setting 10 (20)-6 has priority for group connection, and 10 (20)-2 has
priority for individual connection.
1.4.5 Time for Absence Area Detection
By selecting the energy-saving operation mode when absent, the target temperature is shifted
to the energy-saving end by 1°C (maximum 2°C) after the state of absence continues for a
certain period of time.
Absent time defined for detection can be selected as follows:
10 (20)
 The set temperature displayed on the remote controller remains the same even if the target
 As soon as people are detected while the temperature is shifted, this control will be
Part 5 Field Settings and Test Operation
Mode First Code Second
No. No. Code No.
01
3
02
Mode First Code Second
No. No. Code No.
01
5
02
Mode Second Code
First Code No.
No.
7
temperature is shifted.
cancelled (reset).
Only indoor unit sensor value (or remote controller sensor
Sensor values according to 10 (20)-2 and 10 (20)-6.
No.
01
02
State of absence
31
30
29
28
27
Cooling (at 28°C)
26
21
Heating (at 20°C)
20
19
18
17
30 (60)∗ 60 (120)∗
Elapsed time of absence (min.)
∗ The values in parentheses represent the time
when Second code No. is 02.
Field Settings for Indoor Unit
: Factory setting
Contents
Displayed
Not displayed
: Factory setting
Contents
value, if installed.)
: Factory setting
Contents
30 minutes
60 minutes
Human detection
95