Grizzly G9933 Owner's Manual page 9

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
The following change was recently made to this machine since the owner's manual was printed:
• Added a front guard to each spindle guard assembly.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
New Parts
301
236
234
235
233
REF PART # DESCRIPTION
233 P9933233 FRONT GUARD EXTENSION PLATE
234 P9933234 FRONT GUARD
235 P9933235 FLAT WASHER 6MM
236 P9933236 KNOB BOLT M6-1 X 16 6-LOBE
301 P9933301 CUTTER HAZARD LABEL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
READ THIS FIRST
COPYRIGHT © MAY, 2017 BY GRIZZLY INDUSTRIAL, INC.
#BL18964 PRINTED IN TAIWAN
Model G9933
***IMPORTANT UPDATE***
For Machines Mfd. Since 12/16
and Owner's Manual Revised 05/09
New Inventory
Inventory
A. Front Guards .............................................. 3
B. Front Guard Extension Plates .................... 3
C. Flat Washers 6mm ................................... 12
D. Knob Bolts M6-1 x 16 ............................... 12
A
B
C
Note: The inventory items above are pre-installed
on the fence and guard assemblies. Refer to the
Assembly section in the owner's manual for
instructions on assembling the fence and guard
assemblies.
Qty
D