Power Cord
Connection
Serious personal injury could occur if you
connect the machine to power before com-
pleting the setup process. DO NOT connect
the machine to the power until instructed
later in this manual.
To connect the power cord to the shaper:
1.
Requirements
2.
Figure 3
Figure 3.
3.
Circuit
Page 9
Electrocution could result
if you attempt to connect
the incoming power wires
to the machine when they
are energized with power.
ALWAYS make sure the
incoming power wires are
not connected to power
before installing them to
the machine.
4.
Figure 4.
5.
Figure 4
6.
Figure 4