Figure 21
Figure 21.
To avoid serious personal
injury from entanglement
and electrocution hazards,
ALWAYS disconnect the
machine from power before
opening the cabinet doors
and ALWAYS close and
secure the cabinet doors
before re-connecting the
machine to power.
To change the cutter speed:
1.
2.
Figure 22.
3.
Figure 21
4.
Note: The V-belt is properly tensioned when
there is approximately
the pulleys when moderate pressure is
applied, as illustrated in Figure 23.
Figure 23.
5.
Figure 22
1
⁄
" deflection between
4