Table of Contents
Advertisement
STATUS MESSAGE
You can send and receive Status messages which may be decided in your
talk group. Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99
are reserved for special messages). By configuring a name consisting of a
maximum of 10 alphanumeric characters, each message can be displayed on the
transceiver like a text message.
A received message can be stored in the stack memory of your transceiver and
can be reviewed after reception. The "
in the stack memory.
Transmitting
1
Select your desired zone and channel.
2
Press the button programmed as [Status] to enter Status Mode (proceed to
step 5), or [Individual + Status]/ [Group + Status] to enter Selcall Mode
(proceed to step 3).
3
Press the [ <B ] and [ C> ] buttons to select the station you want to call.
4
Press the [ S ] button to enter Status Mode.
5
Press the [ <B ] and [ C> ] buttons to select the status you want to transmit.
6
Press the PTT switch or [
•
"COMPLETE" appears on the display when the status has been
successfully transmitted.
Receiving
The "
" indicator will flash and a calling ID or text message will appear when a
Status call is received. Press any button to return to normal operation.
SHORT MESSAGES
This transceiver can receive short data messages which contain a maximum of 48
characters.
GPS REPORT
GPS data can be manually transmitted by pressing the button programmed as
[Send the GPS Data], or by accessing the Menu. If set up by your dealer, GPS
data may be automatically transmitted at a preset time interval.
•
When using the GPS function, you must first connect the GPS unit.
•
When the power is turned ON and/ or the reception condition of the GPS
satellite is poor, positioning may take longer to complete.
" icon appears when a message is stored
] button to send Status Messages.
80
Advertisement
Table of Contents
