Kenwood NX-1000 Series User Manual page 68

TX Audio Equalizer
Allows you to set the transmission audio characteristic (Flat, High boost, or Low
boost).
Menu Mode:
1 Select "TX EQ" and press the [ S ] button.
2 Press the [ <B ] and [ C> ] buttons to select the audio characteristic.
Type
FLAT
HIGH BOOST
LOW BOOST
3 Press the [ S ] button to confirm and exit mode.
TX Auto Gain Control
Allows you to set the transceiver to automatically adjust the internal and external
microphone sensitivity for easy listening.
Menu Mode:
Select "TX AGC" and press the [ S ] button to change the TX Auto Gain Control
On or Off.
Volume Up/ Down
Press the programmed button to increase/ decrease the Volume.
Volume Up/ Down (Continuous)
Hold down the programmed button to continuously increase/ decrease the
Volume.
[NXDN/ DMR]
Standard TX audio characteristic.
Treble range is emphasized. Audio sounds clearer and
becomes more understandable.
Treble range is suppressed and bass range is boosted that
makes the audio quality more natural.
[NXDN/ DMR]
[Analog/ NXDN/ DMR]
Description
[Analog/ NXDN/ DMR]
68