Kenwood NX-1000 Series User Manual page 33

Direct Channel 1 ~ 5
Allows you to go directly to Direct Channel 1 ~ 5.
PF Button:
1
Press the programmed button to jump to a frequently used zone and channel.
2 Press this button again to return to the formerly selected channel.
• If activated by your dealer, you can set your own Direct Channels by selecting
your desired zone and channel using Direct Channel 1 ~ 5.
Direct Channel 1 ~ 5 Select
Allows you to set the currently selected channel as the Direct Channel 1 ~ 5.
1
Select the channel to be set as Direct Channel.
2 PF Button:
Press and hold the programmed button to set the currently selected channel
as Direct Channel 1 ~ 5.
Menu Mode:
Select "DR 1 SEL" ~ "DR 5 SEL" and press the [ S ] button to set the currently
selected channel as Direct Channel 1 ~ 5.
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
33