Kenwood NX-1000 Series User Manual page 66

3 Press the [ <B ] and [ C> ] buttons to select the List.
Each time press the [ S ] button to change display type (Message → Caller
•
ID → Channel No.→ Message→ ).
Press the [ A ] button, delete confirmation is displayed, press the [ S ]
•
button to delete displayed Caller ID and Message.
Press and hold the [ A ] button, delete confirmation is displayed, press the
•
[ S ] button to delete all Caller IDs and Messages.
4 Press the [ A ] button to exit Stack Mode.
Status [Analog/ NXDN/ DMR]
Allows you to send status messages selected from the Status List.
1 PF Button:
Press the programmed button to enter Status Mode.
Menu Mode:
2 Press the [ <B ] and [ C> ] buttons to select the status messages you want to
transmit.
3 Press the PTT switch or [
Select "STATUS" and press the [ S ] button to enter Status Mode.
] button to send status messages.
66