Kenwood NX-1000 Series User Manual page 28

Broadcast [DMR]
Allows you to make a Broadcast Group Call. Broadcast Group Call can be used to
engage in one-way informative group voice calls by initiating a call to a group.
PF Button:
Press the programmed button, to switch to Broadcast Call.
Menu Mode:
Select "BROADCAST" and press the [ S ] button to switch to Broadcast Call.
• "BCST ON" is displayed for 1 second and Broadcast Group Call will be On.
Button Lock [Analog/ NXDN/ DMR]
Locking the transceiver button operation. This function prevents the incorrect
operation of the transceiver by physical contact while carrying the transceiver,
such as around the waist.
PF Button:
1
Press the programmed button to lock the transceiver buttons.
2
Press the button again to unlock.
• While Button Lock is on, operate a button that has been locked. "LOCKED" is
displayed for 1 second.
• Even if a button on the transceiver is pressed while the Button Lock is
enabled, a Button-entry Error Tone (1 beep) sounds.
• The following will still function and can be operated as per normal.
• Button Lock, Call Response, Clear, Emergency, Function, LCD Brightness,
Monitor, Monitor Momentary, Save Log Data, Squelch Off, and Squelch Off
Momentary.
28