Kenwood NX-1000 Series User Manual page 27

AUX [Analog/ NXDN/ DMR]
This is the function that can control the transceiver by the port input (High/ Low)
from the connected external device.
PF Button:
Press the programmed button to change the AUX On or Off.
Menu Mode:
Select "AUX" and press the [ S ] button to change the AUX On or Off.
• The " " indicator appears while AUX is On.
AUX Output ID 1 ~ 3 [Analog]
This is the function that can control the connected external device by the port
output (High/ Low) from the transceiver.
PF Button:
Press the programmed button to change the AUX Output ID 1~3 to high or low.
27