Kenwood NX-1000 Series User Manual page 31

To enter 3-digit channel number (example: Channel 123):
1
Press the programmed button to enter Channel Entry Mode.
2 Press the [ <B ] and [ C> ] buttons to select "1"
3 Press the [ S ] button.
4 Press the [ <B ] and [ C> ] buttons to select "2".
5 Press the [ S ] button.
6 Press the [ <B ] and [ C> ] buttons to select "3".
Press the [ A ] button to delete 1 digit number. Press and hold the [ A ]
•
button to delete all numbers.
7 Press the [ S ] button to confirm the entry.
Channel Recall
PF Button:
Press the programmed button during Scan to return to the last called zone and
channel and Scan pauses (Scan Stop Tone will sound every 30 seconds).
[Analog/ NXDN/ DMR]
31