Kenwood NX-1000 Series User Manual page 46

Lone Worker [Analog/ NXDN/ DMR]
Using Lone Worker function, the transceiver can automatically enter Emergency
Mode and notify the base station of the emergency status when the transceiver
becomes disabled from operating due to an accident.
PF Button:
Press the programmed button to change the Lone Worker On or Off.
Menu Mode:
Select "LONE-WK" and press the [ S ] button to change the Lone Worker On or
Off.
• Lone Worker is turn On, "L-WK ON" is displayed for 1 second.
• If transceiver is on the Lone Worker mode, Lone Worker is turn Off, "L-WK
OFF" is displayed for 1 second.
On the Lone Worker mode, Lone Worker Interval time(r) will be counting down.
When you press any button to indicate that you are safe and the timer will be
restarted.
The transceiver automatically enters Emergency Mode if you do not operate the
transceiver during the Lone Worker Interval time.
46