Kenwood NX-1000 Series User Manual page 69

Zone Delete/ Add
Allows you to include or omit each Zone in the Multi-Zone scan sequence.
1
Select your desired zone.
2 PF Button:
Press the programmed button to switch the Zone Delete/ Add status of the
channel.
Menu Mode:
Select "ZONE D/A" and press the [ S ] button to switch the Zone Delete/Add
status of the channel.
• When a zone is added to scan, the "
the display.
• When a zone is deleted (not include in scan), the "
disappears on the display.
Zone Up/ Zone Down
Press the programmed button to increase/ decrease the zone number.
Zone Up (Continuous)/ Zone Down (Continuous)
[Analog/ NXDN/ DMR]
Hold down the programmed button to continuously increase/ decrease the zone
number.
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
" (left side) indicator appears on
69
" (left side) indicator