Kenwood NX-1000 Series User Manual page 61

Scrambler/ Encryption Code
Allows you to change the Scrambler Code/ Encryption Key used in the
transmission.
1 PF Button:
Press and hold the programmed button to enter Scrambler/ Encryption Code
Mode.
Menu Mode:
Select "SCRENC C" and press the [ S ] button to enter Scrambler/ Encryption
Code Mode.
2 Press the [ <B ] and [ C> ] buttons to select the Scrambler Code or Encryption
Key.
• Must be set to the same code/ key for transmission and reception.
3 Press the [ S ] button to confirm and exit mode.
Refer to "SCRAMBLER (ANALOG)/ ENCRYPTION (NXDN/ DMR)"
[Analog/ NXDN/ DMR]
Scrambler Code
Encryption Key
61
{page 75}.