An External Telephone (Remote Rx); Activating The Remote Reception; Receiving Documents Manually With An External Telephone (Remote Rx) - Canon imageCLASS D480 Basic Operation Manual

Receiving Documents Manually with an External Telephone (Remote RX)

Receiving Documents Manually with an
External Telephone (Remote RX)
You can connect one external telephone to the machine.
When the telephone rings with the machine in the MANUAL receive mode, you can use the
external telephone to start receiving the document without walking over to the machine.
The default settings are as follows:
– <REMOTE RX>: ON
– <REMOTE RX ID>: 25

Activating the Remote Reception

Follow this procedure to turn on the remote
reception.
1
Press [Menu].
2
Press [ ] or [
SETTINGS>, then press [OK].
M E N U
5 F A X
3
Press [ ] or [
SETTINGS>, then press [OK].
F A X S E T T I N G S
4 R X
4
Press [ ] or [
RX>, then press [OK].
R X S E T T I N G S
2 R E M O T E
5-36
] to select <FAX
S E T T I N G S
] to select <RX
S E T T I N G S
] to select <REMOTE
R X
5
Press [ ] or [
press [OK].
R E M O T E R X
6
Use – [numeric keys] to enter a
remote reception ID (a combination of
two characters using 0 to 9), then press
[OK].
R E M O T E R X
The default ID is 25. If you do not want to change
the ID, press [OK] without entering any numbers.
7
Press [Stop/Reset] to return to the
standby mode.
] to select <ON>, then
O N
I D
2 5