Incoming Ring; Remote Rx; Auto Rx Switch; System Settings Procedure - Canon imageCLASS MF4570dw Basic Operation Manual

Incoming Ring

Specify whether or not the external telephone will ring
during an incoming call if <RX Mode> is set to <Auto> or
<Fax/Tel Auto Switch>.
You can also specify the number of ringing times.
After the external telephone rings for specified times, the
machine automatically starts receiving when receiving a
fax. When receiving a call, only when <RX Mode> is set to
<Fax/Tel Auto Switch>, the machine's speaker rings.
How to display the settings
[ ] (Menu) → <Fax RX Settings> → <Fax Settings>
→ <Incoming Ring>
Settings
(Boldface: Default settings)
Off
Ring Times: 1 to 2 to 99
On
(times)

Remote RX

If an external telephone is connected, you can switch to the
fax receiving mode immediately by dialing the ID number
for fax receiving using the dial buttons of the telephone
during a phone call.
How to display the settings
[ ] (Menu) → <Fax RX Settings> → <Fax Settings>
→ <Remote RX>
Settings
(Boldface: Default settings)
Off Remote receiving is disabled.
Remote receiving is enabled.
Remote RX ID:
On You can specify an ID number for fax
00 to 25 to 99
receiving in <Remote Receive ID>.

Auto RX Switch

Specify how long an incoming call should ring before the
machine automatically switches to fax mode. This option is
available when the <RX Mode> is set to <Manual>.
How to display the settings
] (Menu) → <Fax RX Settings> → <Fax Settings>
[
→ <Auto RX Switch>
Settings
(Bold: Default settings)
Off
Incoming Ring Time: 1
On
to 15 to 99 (seconds)
The telephone does not ring
during an incoming call.
The telephone rings during an
incoming call.
You can specify the number of
ringing times in <Ring Times>.
The machine will not
automatically switch to fax
mode.
The machine will
automatically switch to fax
mode after the specified
period.

System Settings Procedure

Specify the system settings using the following procedure.
This section describes the procedure for changing the setting
for "TX Start Speed" as an example.
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <System Management
Settings>, and then press [OK].
Menu
Fax TX Settings
Fax RX Settings
Adjustment/Maintena
System Management Se
When the system manager PIN is specified
Enter the system manager PIN.
"Text Input Method" (→P.1-9)
When you are finished entering, press[ ] or [ ] to select <Apply>,
and then press [OK].
System Manager PIN
*******
<Apply>
1 2 3 4 5 6 7 8 9 0
<BS>
3
Press [ ] or [ ] to select <Communication
Management Settings>, and then press [OK].
System Settings
System Manager Info
Device Information
Network Settings
Communication Manage
4
Press [ ] or [ ] to select <Fax Settings>, and
then press [OK].
Communication Mgt. Set
Fax Settings
Memory Lock Settings
OK
. . .
...
...
6-23