Transporting the Machine
Transporting the Machine
This section describes the required procedures before transporting the machine.
Follow this procedure to avoid vibration damage to
the machine when transporting it over a long
distance.
1
Turn off the main power switch.
2
Disconnect the power cord and all the
cables from the back of the machine.
3
If you are using the output tray extension,
fold the paper stopper, and then push the
output tray extension into the machine.
4
Hold the front side of the operation panel
with your hands.
5
Lift the scanning platform (A) until it is
locked. (You will hear an audible "click. " )
6
Hold the grip (A) on the right front side of
the toner cover.
7
Open the toner cover.
10-21