Using The Flash - Canon PowerShot SX10 IS User Manual

72

Using the Flash

1
Raise the flash manually.
2
Press the
1. Use the
flash mode.
: [Auto]
: [On]
• You can configure detailed settings for the flash when you press
the MENU button while this screen is displayed (p. 110).
3
When you are not using the
flash, lower the flash until it
closes.
• (flash off) appears in the LCD
monitor.
You are recommended to shoot with the camera attached to a
tripod or other device if the camera shake warning icon
appears.
The time required for flash recharging will change depending
on usage conditions and remaining battery power.
A flashing red
indicates insufficient light level. In this case, raise the flash
before shooting. However, when shooting with the
or
button.
or button to change the
in the LCD monitor (or the viewfinder)
mode there is no indication.
Available Shooting Modes p. 284
,