To Shoot Images In Focus - Canon PowerShot SX10 IS User Manual

18
Shooting Still Images
5.
Press the shutter button fully (all the way) to shoot.
• The shutter sound will play once and the image will record.
• Movement of the camera or subject while the shutter sound is
playing may result in blurred images.
• Recorded images are displayed on the LCD monitor (or the
viewfinder) for approximately 2 seconds immediately after
shooting (Rec. Review). You can shoot by pressing the shutter
button even when an image is being displayed.
• If you hold the shutter button down after a shot, the image will
continue to display.
• The indicator will blink red and the file will record to the memory
card.

To Shoot Images in Focus

The camera automatically sets the focus when you press the shutter
button halfway*.
* The shutter button has a two-stage action. Pressing it down to the first stage is
referred to as "pressing halfway".
Press halfway
to set the focus
Mute Setting
Pressing the
silence all camera sounds. You can change the setting in
[Mute] in the Set up menu (p. 58).
Correct
Beep, Press fully
beep...
Recording:
Blinks red
AF Frame
An AF frame will display in
green on the LCD monitor at
the point of focus.
button while turning on the camera power will
Incorrect
Just pressing
fully