Canon PowerShot SX10 IS User Manual page 68

66
2
Select [LCD/Viewfinder].
1. Use the
select
• Sets LCD monitor display mode after
the DISP. button is pressed.
• If you do not wish to change the
display mode, press the FUNC./SET
button to display
• You cannot add
active LCD/Viewfinder icon.
3
Make settings.
1. Use the
select the items you wish to display.
2. Press the
mark.
3. Press the MENU button.
• Even though items that are grayed out can be set, they may not
display depending on the shooting mode.
• Display locations with no
displayed.
If you press the shutter button halfway and return to the
shooting screen from the custom display settings screen, the
settings will not be saved.
, , or
, , or .
( /
to the current
, , or
button to place a
button to
/ / ).
button to
Items with
marks will not have any information
Viewfinder
LCD monitor
Current active display
are displayed.