Changing The Delay Time And Number Of Shots - Canon PowerShot SX10 IS User Manual

76
2
Make settings.
1. Use the
[Self-Timer].
2. Use the
3. Press the
4. Press the MENU button.
3
Press the
1. Use the
self-timer mode.
• Pressing the MENU button while this
screen is displayed will display the
[Drive Settings] screen in Step 2.
4
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Control] (p. 110), the lamp will
light 2 seconds before the flash fires.
To Cancel the Self-Timer:
Follow Step 3 to select

Changing the Delay Time and Number of Shots (

1
Select [Drive Settings].
1. Press the MENU button.
2. In the
button to select [Drive Settings].
3. Press the
or button to select
or button to set.
button.
button.
or button to select the
.
menu, use the
button.
or
)