Canon PowerShot SX10 IS User Manual page 149

3
Aim the camera so that the original color
appears at the center of the LCD monitor (or
the viewfinder) and press the
• Only one color can be specified.
• You can use the
the range of colors that are changed.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor (or
the viewfinder) and press the
• Only one color can be specified.
5
Press the DISP. button to complete the setting,
then shoot.
• When you press the Movie button, you can shoot movies in
Color Swap mode.
The default setting for Color Swap changes green into white.
You may not obtain the expected results if you use the flash.
The colors and color range specified in the Color Swap mode
are retained even if the camera's power is turned off.
or button or the control dial to specify
button.
button.
147