Connecting To A Tv; Shooting/Playback Using A Tv - Canon PowerShot SX10 IS User Manual

Connecting to a TV

Shooting/Playback Using a TV

You can use the supplied Stereo Video Cable STV-250N to shoot or
playback images using a TV.
1
Turn off the camera and the TV.
2
Connect the stereo/video
cable to the camera's A/V
OUT terminal.
• With your fingernail on the upper
edge of the camera's terminal cover,
pull it forward to open it, and plug the
Stereo/Video Cable in all the way.
3
Plug the other ends of the stereo/video cable
to the VIDEO IN and AUDIO IN jacks on the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera.
223
To the Video IN Jack
Plug (Yellow)
To the Audio IN Jack
Plug (Left) (White)
To the Audio IN Jack
Plug (Right) (Red)