Image Is Blurred Or Out Of Focus - Canon PowerShot SX10 IS User Manual

232
Camera is connected to a
computer/printer mode.
Flash is charging.
(Blinking white
monitor or the viewfinder.)
Memory card is full.
Memory card is not
formatted correctly.
SD memory card or SDHC
memory card is write
protected.

Image is blurred or out of focus.

The camera moves when
the shutter button is
pressed.
AF-assist Beam is set to
[Off].
Switch to the shooting mode after
disconnecting the interface cable in
connecting to a computer/printer
mode.
When the flash is charged, the
on LCD icon stops blinking and lights steadily
on LCD monitor or the viewfinder.
Shooting is now possible.
Insert a new memory card (p. 11).
If required, download the images to a
computer and erase them from the
memory card to make space.
Format the memory card (pp. 16,
215).
If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest Canon
Customer Support Help Desk.
Slide the write protect tab upward
(p. 250).
Confirm the procedures in
" appears" (p. 231).
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 55). Take care not to obstruct the
AF-assist Beam with your hand when
used.