Canon PowerShot SX10 IS User Manual page 167

3
Adjust the trimming frame.
• You can change the size of the
trimming frame using the zoom lever.
However, the resolution of the saved
image will differ according to the size
of the trimmed image.
• You can change the position of the
trimming frame using the
or button.
• Press the DISP. button to change the vertical/horizontal
orientation of the trimming frame.
• If a face is detected, a gray frame appears around the face
displayed in the top left screen. Trimming can be performed
around this gray frame. If multiple frames are displayed, you can
switch between frames by turning the control dial.
4
Save the image.
1. Press the
2. Use the
[OK].
3. Press the
• The trimmed image will be saved in a
new file.
• If you wish to continue trimming of another image, repeat
operations from Step 2.
5
Display the saved image.
1. Press the MENU button.
2. Use the
[Yes].
3. Press the
• Selecting [No] returns to the Play
menu.
button.
or button to select
button.
or button to select
button.
Resolution After Trimming
, ,
165