Table of Contents
Advertisement
Flash Photography
Automatic Flash Photography
Automatic flash photography becomes possible when Canon's
EX50mm F1.8 lens and Canolite D are used in
combination.
The charge voltage of the electronic flash unit and the
photographing distance enter the exposure meter circuit as
signals.
Therefore, photography can be performed with com-
pletely the sarI:1e operations as in ordinary EE photography.
Operation Procedure
1
2
3
Push down the CAT System switching knob so that it
meshes and couples with the notch on the distance
ring.
Set the shutter speed dial at 60 and the EE/Manual
switching ring at OFF.
Remove the electric shock prevention cover, attach Canolite
D to the accessory shoe, and set the switch at ON
.
4
Set the focus.
5
Check the exposure meter needle. When preparations have
been completed for flashing with Canolite D, the exposure
neetlle appears inside the EE exposure
range.
Gently press the
shutter release button for taking pictures. When the exposure
needle remains inside the warning
mark,
it means the shooting
distance is too far or too close or the charge of the electronic
~
ash
is insufficient.
~
Advertisement
Table of Contents
