Canon PowerShot SX10 IS User Manual page 258

256
It takes approximately 4 hours 40 minutes for the charger to
fully recharge the batteries after they have been depleted.
Charge batteries in an environment where the temperature is
in the range of 0 to 35 °C (32 to 95 °F).
The charging time varies according to the ambient
temperature and to the battery charge state.
The battery charger may emit noise while charging. This is
not a malfunction.
Using the AC Power Adapter CA-PS700
It is best to power the camera with Power Adapter CA-PS700 (sold
separately) when you are using it for long periods of time or connecting
it to a computer.
Turn the camera power off before connecting or disconnecting
the compact power adapter.
1
Connect the power
cord to the compact
power adapter first and
then plug the other end
into the power outlet.
2
Slip your fingernail under
the upper end of the
terminal cover, and
connect the DC plug of
the compact power
adapter to the camera's
DC IN terminal.
DC IN terminal