Canon PowerShot SX10 IS User Manual page 147

2
Press the DISP. button.
• The camera will switch to color input
mode, and the display will alternate
between the original image and the
Color Accent image (using the
previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor (or the viewfinder) and press the
button.
• Only one color can be specified.
• You can use the
the range of the colors that are retained.
–5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
4
Press the DISP. button to complete the setting,
then shoot.
• When you press the Movie button, you can shoot movies in
Color Accent mode.
The default Color Accent is green.
You may not obtain the expected results if you use the flash.
The specified Color Accent and color range is retained even
if the camera's power is turned off.
or button or the control dial to specify
145