Auto Exposure Bracketing (Aeb Mode) - Canon PowerShot SX10 IS User Manual

136

Auto Exposure Bracketing (AEB Mode)

In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 108). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
1
Select AEB.
1. Press the
2. Use the
and use the
select
3. Press the DISP. button.
2
Adjust the compensation
range.
1. Adjust the compensation range with
the or
2. Press the
• The compensation range can be set
as wide as 2 levels lower and 2 levels
higher than the standard exposure
value (the compensated exposure
value if exposure adjustment was performed) at the center point
in 1/3 increments. If exposure adjustment (p. 134) is already
done, setting can be done with the adjusted value as the center
point.
To Cancel the AEB Mode:
Select in Step 1.
The AEB mode is not available when shooting with the flash
on. Only one standard exposure image will be recorded.
Available Shooting Modes
button.
or button to select
or button to
.
button.
button.
p. 284
Standard
exposure
Compensation range