Canon PowerShot SX10 IS User Manual page 236

234
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
Flash is set to
on).
Image contains noise.
ISO speed is too high.
White dots appear on the image.
Light from the flash has
reflected off dust particles
or insects in the air. This is
particularly noticeable
when shooting using the
wide angle or when you
increase the aperture
value in the aperture
priority mode.
Change the shooting angle.
(Flash Push down the flash to
(p. 72).
Higher ISO speeds and
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 84).
In
and
or when using the Auto ISO Shift, the
ISO speed increases and noise can
appear.
This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
and modes, or
modes in the
(Flash off)
(High ISO
, , ,
mode,