Connecting To A Tv; Shooting/Playback Using A Tv - Canon PowerShot SD870 IS Digital Elph User Manual

Connecting to a 1V
1183
:;£111&I;1:=;:;:=:::
I
Shooting/Playback Using a TV
~~~@]
You can use the supplied AV cable to shoot or playback images using
a
TV.
1
Turn off the camera and the TV.
2
Connect the AV cable to
the camera's AIV OUT ter·
minal.
• Open the terminal cover by slipping
a fingernail under the upper edge
and plug the AV cable in all the way.
Plug the other ends of the
AV cable to the
VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
Turn on the camera.
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 52). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
• If the video system is set incorrectly, the camera output may
not display properly.
•