To Shoot Images In Focus - Canon PowerShot SX10 IS User Manual

i
18 _ Shooting StIH images
o ' _o Press the shutter button fully (all the way} to shoot.
• The shutter sound will play once and the image will record,
_" ' • Movement of the camera or subject while the shutter sound is
playing may result in blurred images,
• Recorded images are displayed on the LCD monitor (or the
viewfinder) for approximately 2 seconds immediately after
shooting (Rec. Review), You can shoot by pressing the shutter
button even when an image is being displayed,
/
• If you hold the shutter button down after a shot, the image will
continue to display,
• The indicator will blink red and the file will record to the memory
card.
The camera automatically sets the focus when you press the shutter
button halfway*,
• The shutter button has a two-stage action. Pressing it down to the first stage is
referred to as "pressing halfway'.
y.................................................... Correct . ................................ _,f,,,_H_, _ Incorrect ,,_,_,,_
Pot es_{_ae_ f_o/aY sJ., ............. ......Pressfully Ji& Just pressing,_
w _
/
Nute Setting
Pressing the _ button while turning on the camera power will
silence all camera sounds, You can change the setting in
[Mute] in the Set up menu (p, 58),