Sound Detection - EverFocus H265 Series User Manual

Click Refresh to refresh the page; click Save to save the settings.

3.4.2.3 Sound Detection

You can configure the Sound Detection alarm settings here:
Alarm Output: After enabling the Alarm, select a timeout duration for the alarm output.
Post Recording: Select a post recording time when a sound detection event is triggered.
Send Email: Switch the button to the right to enable the Email alert function. When a sound detection
event is triggered, the camera will send an email alert with a snapshot image to the pre-configured Email
receiver. Note that for this function to work, you have to set up the Email function in advance.
FTP Pic. Upload: When a sound detection event is triggered, the system will upload alarm images to FTP
server. Note that for this function to work, you have to set up FTP configurations in advance.
Picture to Cloud: When a sound detection event is triggered, the system will upload alarm images to
Cloud (Dropbox). Note that for this function to work, you have to set up Cloud in advance.
Alarm Out: Select to enable the Alarm Out.
Enable Recording: Switch the button to the right to enable the sound detection recording function. To
further configure recording schedule, click the Schedule button to set up record schedule.
Move your mouse cursor over the schedule time blocks. Click and drag on the schedule time blocks to
draw the blocks with orange color, which will be applied with Sound Detection recording function.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
23