Hm (Heat Map) - EverFocus H265 Series User Manual

Value ip network camera

Hide thumbs Also See for H265 Series:

Table of Contents

3.5.1.7 HM (Heat Map)

[Heat Map Settings ] : You can configure the Heat Map settings here.

Enable: Enable or disable this function.

Rule Number: Draw a rule area on the area map, and click to the next few rules, then you can draw

rules on the area map. The rule switch and rule type of each rule are independent, and they need

to be opened, closed or set separately.

Rule Switch: The switch to every rule.

Click Refresh to refresh the page; click Save to save the settings.

To configure the Heat Map settings :

In the Setup field, click to set up the heat map settings. Please refer to [Heat Map Settings ]

above.

To draw a line:

Use your mouse to click 4 points to draw a rectangle shape. The shape should be convex.

Concave shape is not allowed.

If you want to move the area to other position or re-size the area, select the area by

checking the red box on the upper-left corner of the area, the borders of the area will

change to red color. Drag and drop the area to a desired position. Drag the red dots at the

edge of the area to re-size the area.

Value IPCam-SG Series – H265, 2MP / 5MP / 8MP

Table of Contents